Overview

FuelClear™ M68 Test Kits are a simple, accurate and cost- effective method for continuously monitoring the presence of bacteria & fungi (The Diesel Bug) in hydrocarbon fuels. Unlike some tests, M68 detects both bacterial and fungal contamination and has been used by some of the world's largest shipping companies for detection of microbes in fuel storage.

The dipslides can be dipped into a fuel sample, incubated in a supplied tube for 48 hours and then measured against a chart provided with the pack.

Note: FuelClear™ M68 Test Kits are not used for aviation and MicrobMonitor 2 should be used instead.

Buy Now

Find a Stockist

Specification

FuelClear™ M68 Test Kit contains 2 or 10 Polystyrene tubes containing polyethylene paddles coated with agar culture media, 1 pair of Latex disposable gloves and labels.

• Front Agar Type - Tryptone Soya (TSA)

• Front Agar Colour - Straw

• Front Agar Growth - Total Count (TTC / Red Spot)

• Rear Agar Type - Rose Bengal

• Rear Agar Colour - Pink

• Rear Agar Growth - Yeasts & Moulds

• Shelf Life - 6 to 8 months

• Suggested Incubation Times - 24 - 120 Hours

• Suggested Incubation Temp - 30°C

Product Conforms to EC 1907/2006 (REACH). Not to be used for Aviation Applications.

Application

The packs of M68 either contain 2 or 10 dipslides: 1 test can be performed prior to treatment with FuelClear™ M68 Biocide and 1 test 24 hours after treatment. Alternatively, use as an ongoing cost-effective test method. The dipslides can be used to detect bacteria (the yellow side of the test kit) or fungi (the pink side) in either water bottoms (i.e. the layer of water at the base of the fuel tank) or the fuel itself. Each slide is covered in the suspect fuel for 5-10 seconds.

Following 48 hours incubation (locate the dipslides at room temperature or somewhere slightly warmer such as an engine room), review the dipslides for microbial colonies. Each colony represents a concentrated area upon which microbes have developed. If there is any concern over the veracity of the result, repeat the test with another dipslide or contact Fuelcare. If the test reveals medium to extreme growth treat urgently with FuelClear™ M68 fuel biocide.

1. Remove cap without touching the gel, withdraw the dipslide.

2. Immerse the dipslide in your fuel for 10 seconds ensuring adequate coverage on both sides.

3. Allow excel fluid to drain for a few seconds.

4. Replace the dipslide into the clear plastic tube and label as required.

5. Leave the product to incubate in a warm environment (30°C) for 48 hours.

6. Bacterial contamination is shown on the white side of the slide, yeasts & moulds on the pink side. Compare incubated slides after 48 hours against the comparison chart.

Fuels: All middle distillate fuels including Diesel, Gas Oil, Petrol, Heating Oil, Biodiesel, Fuel Emulsions.

Industries: Marine, Rail, Agriculture, Automotive, Home Heating & Power Generation sectors.

Features and Benefits

Dip slides are an easy and fast way of testing, with no preparation or training required.

• Ready to use • Inexpensive • Flexible paddle • Easy run off design • Recessed handle • Dual sided • Thick reliable agar • Results can be read without opening the dipslide

For more information on the product please contact us.

Downloads

Documentation for the safe & effective use of FuelClear M68 Test Kit:

Download
Brochure (English)
Safety Data (English)
Product Data (English)
Product Data (Spanish)
Product Data (French)
Product Data (Italian)

Find One Of Our Selected Stockists

To find your nearest stockist or supplier of Fuelcare products, please use our stockist finder. Simply enter your postcode to see a list of branches near you, including contact details.

To buy one of our products, please click here

Your Results

FuelClear™ M68 Test Kit

FuelClear™ M68 Test Kits are a simple, accurate and cost- effective method for continuously monitoring the presence of bacteria & fungi (The Diesel Bug) in hydrocarbon fuels.

Use biocides safely. Always read the label and product information before use.